IT595 - 8-bit serial-in, serial or parallel-out shift register


The IT595 is a high-speed Si-Gate CMOS device and is pin compatible with low power Schottky TTL(LSTTL). They are specified in compliance with JEDEC standard no. 7A.

The IT595 is an 8-stage serial shift register with a storage register and 3-stage outputs. Shift registers and storage registers have separate clocks.

Data is shifted on the positive-going transitions of the SH_CP input. The data in each register is transferred to the storage register on a positive-going transition of the ST_CP input. If both clocks are connected together, the shift register will always be one clock pulse ahead of the storage register.

The shift register has a serial input (DS) and a serial standard output (Q7 ') for cascading. It is also provided with asynchronous reset (active LOW) for all 8 shift register stages. The storage register has 8 parallel 3-state bus driver outputs. Data in the storage register appears at the output whenever the output enable input (OE) is LOW.


  • 8-bit serial input

  • 8-bit serial or parallel output <±2%

  •  Output Storage register with 3-state outputs

  • Shift register with direct clear

  • 100 MHz (typical) shift out frequency

  • 2V ~ 5.5V Supply Voltage



Technology Information:

  Data Sheet

  Package: SOP16


    Other Products